Classic Roof Panel
CFR Standing Seam Panel
VR16 II Standing Seam Panel
Perfect for a more architectural look, the 2” vertical rib standing seam roof brings all of the benefits of a floating standing seam roof system. The VR16 II offers the same weather tightness of the CFR standing seam roof, yet it is ideal for hip and valley condi2ons. Panels are installed with concealed fastener clips that allow for thermal movement and mechanically seamed for weather tightness. The panel is available in Galvalume with a 25- year warranty. VR16 II Standing Seam Panel comes standard in 24 gauge, 16” panel width, and 80,000 psi steel. Other colors in PVDF are available with a 30-year warranty. This panel offers maximum weather protection.
Translucent Roof Panels
Translucent Panels are available for the CFR Standing Seam Roof Panels and the Classic Roof Panels. The panels are available in standard 5-‘0” and 10’-0” lengths. The metal portion of the panel comes in Polar White (PW), SP (Silicone Polyester). The translucent part can be insulated or non-insulated. The CFR Translucent Panels are available to fit purlin or joist spacing between 5’-6” or 6”-0” and are hand crimp the full length of the panel. The Classic Roof Translucent Panels are available to fit purlin or joist spacing between 5’-0” or 5”-6” and are field installed with self-drilling screws. Translucent panels are recommended to be installed 15’-0” from the low eave and every for panels.
High Rib Roof Panel – HR3
With the insulation already sandwiched between panels, the insulated panels arrive to your job site in one piece and require one simple step installation. The panel’s overlapping joint is self-aligning and allows for easy sealant applications where the panels join. The insulated panel based roof is energy efficient and saves construction time. The HR3 range in thickness and R Value (2.5” = R-21, 4” = R-33, 5” = R-42 and 6” = R-50). Panels range in length from 8’-0“ minimum to 56’-0” maximum. Metal facing is 26 gauge G-90 galvanized steel in PVDF and is available in 22 gauge and 24 gauge. Panel standard width is 3’-4”.
Standing Seam Roof – SR2
The insulated standing seam roof is an excellent op2on for field assembled standing seam roof applications. The panels install quickly and efficiently with a high level of thermal R-value for your metal building. The panel’s overlapping joint is self-aligning and allows for easy sealant applications where the panels join. The insulated panel based roof is energy efficient and saves construction time. The SR2 range in thickness and